vs-40eps16pbf, vs-40aps16pbf, vs-40eps16-m3, VS-40APS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 1 document number: 94344 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage, input rectifier diode, 40 a features ? very low forward voltage drop ? 150 c max. operating junction temperature ? glass passivated pellet chip junction ? designed and qualified according to jedec ? -jesd 47 ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? input rectification ? vishay semiconductors switch es and output rectifiers which are available in identical package outlines description high voltage rectifiers opti mized for very low forward voltage drop with moderate leakage. these devices are intended for use in main rectification (single or three phase bridge). ? ? ? ? ? ? ? ? product summary package to-247ac modified (2 pins), to-247ac i f(av) 40 a v r 1600 v v f at i f 1.14 v i fsm 475 a t j max. 150 c diode variation single die to-247ac modified to-247ac 1 2 3 1 2 3 base cathode + 2 13 anode -- anode base cathode 2 13 anode cathode v s -40ep s 16p b fv s -40ap s 16p b f v s -40ep s 16-m 3 v s -40ap s 16-m 3 available major ratings and characteristics symbol characteristics values units i f(av) sinusoidal wa v eform 40 a v rrm 1600 v i fsm 475 a v f 20 a, t j = 25 c 1.0 v t j -40 to +150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-40eps16p b f 1600 1700 1 vs-40eps16-m3 vs-40aps16pbf VS-40APS16-M3
vs-40eps16pbf, vs-40aps16pbf, vs-40eps16-m3, VS-40APS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 2 document number: 94344 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rating characteristics fig. 2 - current rating characteristics absolute maximum ratings parameter symbol test conditions values units maximum a v erage forward current i f(av) t c = 105 c, 180 conduction half sine wave 40 a maximum peak one cycle ? non-repetiti v e surge current i fsm 10 ms sine pulse, rated v rrm applied 400 10 ms sine pulse, no v oltage reapplied 475 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 800 a 2 s 10 ms sine pulse, no v oltage reapplied 1131 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no v oltage reapplied 11 310 a 2 ? s electrical specifications parameter symbol test conditions values units maximum forward v oltage drop v fm 40 a, t j = 25 c 1.14 v forward slope resistance r t t j = 150 c 7.6 m ? threshold v oltage v f(to) 0.72 v maximum re v erse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 1.0 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage ? temperature range t j , t stg -40 to +150 c maximum thermal resistance, ? junction to case r thjc dc operation 0.6 c/w maximum thermal resistance, ? junction to am b ient r thja 40 typical thermal resistance, ? case to heatsink r thcs mounting surface, flat, smooth, and greased 0.2 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (l b f in) maximum 12 (10) marking de v ice case style to-247ac modified (jedec) ? case style to-247ac 40eps16 40aps16 130 125 120 115 110 105 100 95 135 140 150 145 maximum allowable case temperature (c) average forward current (a) 45 35 40 30 25 20 15 10 5 0 30 60 90 120 1 8 0 v s-40eps16 r thjc (dc) = 0.6 k/ w cond u ction angle ? 150 140 130 120 110 100 maximum allowable case temperature (c) average forward current (a) 10 20 60 70 30 40 50 0 dc 30 60 90 120 1 8 0 v s-40eps16 r thjc (dc) = 0.6 k/ w ? cond u ction period
vs-40eps16pbf, vs-40aps16pbf, vs-40eps16-m3, VS-40APS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 3 document number: 94344 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - forward voltage drop characteristics fig. 6 - maximum non-re petitive surge current fig. 7 - thermal impedance z thjc characteristics 5 0 30 35 50 55 60 45 40 25 20 15 10 maximum average forward power loss (w) average forward current (a) 10 51520 40 25 30 35 0 rms limit 1 8 0 120 90 60 30 v s-40eps16 t j = 150 c cond u ction angle ? 50 60 70 8 0 40 30 20 10 0 maximum average forward power loss (w) average forward current (a) 10 20 60 70 30 40 50 0 dc 1 8 0 120 90 60 30 rms limit v s-40eps16 t j = 150 c ? cond u ction period 1 10 100 1000 instantaneous forward current (a) instantaneous forward voltage (v) 0.5 1.5 2.5 t j = 25 c t j = 150 c v s-40eps16 500 450 400 350 300 250 200 150 100 peak half sine wave forward current (a) pulse train duration (s) 1 0.01 0.1 v s-40eps16 vers u s p u lse train d u ration. initial t j = 150 c no voltage reapplied rated v rrm reapplied maxim u m non-repetitive s u rge c u rrent 0.01 0.1 1 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) steady state val u e (dc operation) single p u lse d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.0 8 v s-40eps16
vs-40eps16pbf, vs-40aps16pbf, vs-40eps16-m3, VS-40APS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 4 document number: 94344 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-40eps16pbf 25 500 antist atic plastic tubes vs-40eps16-m3 25 500 antist atic plastic tubes vs-40aps16pbf 25 500 antistatic plastic tubes VS-40APS16-M3 25 500 antistatic plastic tubes links to related documents dimensions to-247ac modified www.vishay.com/doc?95541 to-247ac www.vishay.com/doc?95542 part marking information to-247ac modified pbf www.vishay.com/doc?95255 to-247ac modified -m3 www.vishay.com/doc?95442 to-247ac pbf www.vishay.com/doc?95226 to-247ac -m3 www.vishay.com/doc?95007 1 - vishay semiconductors product - current rating (40 = 40 a) 2 - circuit configuration: 3 - package: 4 - type of silicon: 5 - voltage rating (16 = 1600 v) 6 a = single diode, 3 pins e = single diode, 2 pins p = to-247ac modified s = standard recovery rectifier device code 5 1 3 2 4 6 7 40 vs- e p s 16 pbf - 7 environmental digit: pbf = lead (pb)-free and rohs-compliant -m3 = halogen-free, rohs-compliant, and terminations lead (pb)-free
outline dimensions www.vishay.com vishay semiconductors revision: 21-apr-15 1 document number: 95541 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 - 50 mils l/f modified dimensions in millimeters and inches notes (1) dimensioning and tolerance per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c and q symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.35 0.020 0.053 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.17 1.37 0.046 0.054 e1 13.46 - 0.53 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 0.254 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 7.39 - 0.291 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c a (6) ? p (datum b) ? p1 d1 (4) 4 e1 view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating 0.10 a c m m ? k b d m m
outline dimensions www.vishay.com vishay semiconductors revision: 21-apr-15 1 document number: 95542 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 - 50 mils l/f dimensions in millimeters and inches notes (1) dimensioning and tolerancing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c and q symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.35 0.020 0.053 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.17 1.37 0.046 0.054 e1 13.46 - 0.53 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 0.254 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 7.39 - 0.291 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) p (datum b) p1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
